BTXTQ - NIPOL CARBOXY ELASTOMERS, 1072EP
- MSDS: BTXTQ
- Manufacturer: ZEON CHEMICALS INC
- Product Name: NIPOL CARBOXY ELASTOMERS, 1072EP
- National Stock Number: 9320-00N046402
Product Identification
Product ID:NIPOL CARBOXY ELASTOMERS, 1072EP
MSDS Date:12/02/1991
FSC:9320
NIIN:00N046402
MSDS Number: BTXTQ
Responsible Party
ROLLING MEADOWS, IL 60008
US
Emergency Phone: 800-735-3388
Info Phone: 708-437-9770
Cage: 0J3F9
Contractor
Telephone: 800-735-3388/502-775-2000
Cage: 0J3F9
Ingredients
PROCESSING OPERATIONS AT YOUR WORKPLACE/YOUR
RTECS: 9999999ZZ
POLYMER BREAKDOWN EMITTING SMOKE & FUMES SHOULD
RTECS: 9999999ZZ
HANGUP/STAGNATION DURING PROCESSING MAY CAUSE
RTECS: 9999999ZZ
AVOID EXPOS, PROVIDE EMPLOYEES W/SUITABLE NIOSH/MSHA
RTECS: 9999999ZZ
ROUTINE INHAL. VENT MUST BE ADEQ TO MAINTAIN AMBIENT
RTECS: 9999999ZZ
CARCIN. CFR VOL 29, 1910.1045,
RTECS: 9999999ZZ
IARC CANCER REVIEW, IARC MONOGRAPHS,
RTECS: 9999999ZZ
ANTICIPATED TO BE CARCINOGEN.
RTECS: 9999999ZZ
DEPIGMENTATION OF SKIN(VITALIGO) ASSOC
RTECS: 9999999ZZ
OR COMBUST PRODS WILL CAUSE IRRIT OF RESP TRACT,
RTECS: 9999999ZZ
SHOULD BE REGARDED AS POTNTLY HAZ & MEASURES TAKEN
RTECS: 9999999ZZ
PHASE OF FIREFIGHTING OPERATIONS.
RTECS: 9999999ZZ
ON VARIABLES SUCH AS SPECIFIC FORMULATION &
RTECS: 9999999ZZ
WELL VENTED CNDTNS & AVOID CONTINUED/PRLNG BRTHG OF
RTECS: 9999999ZZ
AREAS. CLEAN UP FOLLOWING NORM PROCESSING SHOULD BE
RTECS: 9999999ZZ
HELD AT PROCESS TEMPS FOR SHORT TIME W/OUT
RTECS: 9999999ZZ
THAT EXPOS TO EITHER ELEVATED TEMP/EXCESSIVE TIME
RTECS: 9999999ZZ
EXTENDED TIME PERIODS W/CMPD IN IT/DECOMP WILL
RTECS: 9999999ZZ
CONTAMS, MAY BE COMBUST & SHOULD BE PERIODICALLY
RTECS: 9999999ZZ
ACRYLONITRILE (SARA III)
CAS: 107-13-1
RTECS: AT5250000
Fraction By Weight: <20% PPM
OSHA PEL 2 PPM,10 PPM, C, S
ACGIH TLV: 2 PPM, S
EPA Report Quantity: 100 LBS
DOT Report Quantity: 100 LBS
1,3-BUTADIENE; (BUTADIENE) (SARA III)
CAS: 106-99-0
RTECS: EI9275000
Fraction By Weight: <5% PPM
OSHA PEL 1000 PPM
ACGIH TLV: 10 PPM
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
PHENOL, P-(TERT-BUTYL)-; (P-T-BUTYL PHENOL)
CAS: 98-54-4
RTECS: SJ8925000
Fraction By Weight: <0.1%
OSHA PEL N/K
ACGIH TLV: N/K
ACRYLONITRILE/BUTADIENE/METHACRYLIC ACID POLYMER
CAS: 9010-18-5
Fraction By Weight: 100%
OSHA PEL N/K
ACGIH TLV: N/K
ALIPHATIC HYDROCARBONS. COMBUST PRODS FROM
RTECS: 9999999ZZ
MUST BE CONSIDERED TOXIC.
RTECS: 9999999ZZ
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:YES
Health Hazards Acute and Chronic:OVEREXP IS NOT EXPECTED AT AMBIENT
TEMPS. NO ADVERSE HLTH EFTS ARE EXPECTED DURING NORMAL PROCESSING
WHEN POTNTL EXPOS ARE ELIM BY GOOD INDUS HYGIENE PRACT & WELL
VENTILATED CNDTNS. AT PROCESSING TEMP S, COMBINED INGS MAY EMIT
FUMES & VAPS THAT CAUSE IRRIT TO RESP TRACT, EYES &/OR SKIN.
TYPICALLY, (EFTS OF OVEREXP)
Explanation of Carcinogenicity:ACRYLONITRILE:IARC MONOGRAPHS, SUPP, VOL
7, PG 79, 1987:GRP 2A. NTP 6TH ANNUAL RPT ON CARCINS, 1991:ANTIC TO
BE (ING 7)
Effects of Overexposure:HLTH HAZ:THESE EFTS ARE REVERSIBLE UPON REMOVAL
FROM EXPOS & NO LASTING EFTS ARE EXPECTED. MOST IMPORTANTLY, POTNTL
FOR IRRIT WILL DEPEND ON EFTIVENESS OF EXHST VENT PROVIDED TO
PROCESS AREA. PROD CON TAINS TRACE AMT OF P-T-BUTYL PHENOL AS
COMPONENT OF ANTIOXIDANT PACKAGE. ALTHOUGH RARE, THERE ARE RPTS OF
(ING 10)
Medical Cond Aggravated by Exposure:NONE KNOWN FOR PRODUCT AS
DELIVERED.
First Aid
First Aid:IF IRRIT OCCURS/PERSISTS FROM ANY RTE OF EXPOS, REMOVE
AFFECTED INDIVIDUAL FROM AREA. CALL MD. PROVIDE PROT BEFORE
ALLOWING REENTRY. INGEST:CALL MD IMMED . EYE:FLUSH W/RUNNING WATER
FOR AT LST 1 5 MINS WHILE HOLDING EYELIDS OPEN. CONSULT MD IF IRRIT
PERSISTS. SKIN:REMOVE CONTAM CLTHG. WASH SKIN W/SOAP & WATER.
INHAL:REMOVE AFFECTED INDIVIDUAL TO FRESH AIR. CONSULT MD IMMED.
Fire Fighting
Extinguishing Media:WATER, ABC DRY CHEM/PROTEIN TYPE AIR FOAMS ARE REC
MEDIA. ELASTOMERS WOULD BE CONSIDERED "ORDINARY COMBUSTS". (SUPDAT)
Fire Fighting Procedures:USE NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP .
PERS NOT HAVING SUITABLE NIOSH/MSHA APPRVD RESP PROT MUST LEAVE
AREA TO PVNT SIGNIFICANT EXPOS TO (SUPDAT)
Unusual Fire/Explosion Hazard:MOST ORG SUBSTANCES WHEN IN FORM OF FINE
DUST/PWDR PRESENT DUST EXPLO HAZ. SPECIAL PRECS MUST BE TAKEN IF
THESE ELASTOMERS ARE GROUND/OTHERWISE FORMED (SUPDAT)
Accidental Release
Spill Release Procedures:SWEEP, SHOVEL/VACUUM CRUMBS/CHUNKS INTO CNTNRS
FOR REUSE/DISP. PLACE RESIDUAL IN CLSD, DUST TIGHT CNTNR TO AWAIT
REUSE/DISP. IN ENCLSD/POORLY VENTED AREAS, WEAR NIOSH/MSHA APPRVD
SCBA DURING CLEANUP I MMED AFTER FIRE AS WELL AS DURING ATTACK (ING
13)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN COOL, DRY PLACE AWAY FROM
DIRECT LIGHT TO MAINTAIN QUALITY. COMPOUNDING INGS PURCHASED TO ADD
TO ELASTOMER PRODS MAY REQ SPECIAL HNDLG.
Other Precautions:IT IS USER'S RESPONSIBILITY TO FOLLOW REC PRECS OF
INDIVIDUAL ADDITIVE SUPPLIERS. DURING NORM PROCESSING, VIRTUALLY
ALL ELASTOMERS WILL EMIT FUMES & VAPS WHEN HEATED TO PROCESSING
TEMPS. CONC & COMPOS ITION OF THESE VAPS WILL DEPEND (ING 14)
Exposure Controls
Respiratory Protection:AS SUPPLIED, RESP PROT IS NOT TYPICALLY REQD
DURING NORMAL USE & HNDLG OPERATIONS. NIOSH/MSHA APPRVD RESP PROT
MAY BE NEEDED IF PROD IS GROUND INTO FINE PWDR/DUST. ABNORMAL
CNDTNS SUCH AS EQUIP MALFUN CTION, IMPROPER EQUIP/PROCS, OR (ING
23)
Ventilation:EFTIVE GEN &, IF NEC, LOC EXHST VENT MUST ALWAYS BE
PROVIDED TO DRAW FUMES/VAPS AWAY FROM WORKERS TO PVNT (ING 25)
Protective Gloves:RUBBER GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKER GOGGLES .
Other Protective Equipment:PROT CLTHG SHOULD BE WORN DURING CLEANUP
OPERATIONS TO PVNT SKIN CONT. DO NOT USE PROCESSING EQUIP TO HEAT
FOOD.
Work Hygienic Practices:WASH THOROUGHLY AFTER PROCESSING COMPOUND,
ESPECIALLY BEFORE EATING, SMOKING OR USING TOILET FACILITIES.
Supplemental Safety and Health
% VOLAT:<1%(WATER VAP)(WT). EXTING MEDIA:CARBON DIOXIDE IS GENRLY NOT
REC FOR USE ON CLASS A FIRES AS LACK OF COOLING CAPACITY MAY RSLT
IN REIGNIT. FIRE FIGHT PROC:TOX COMBUST GASES FROM ANY SOURCE. E
XPLO HAZ:INTO FINE PWDR. HYDROGEN CYANIDE GAS IS FORMED UPON
COMBUST. THIS REPRESENTS HAZ TO FIREFIGHTERS.
Chemical Properties
Spec Gravity:1 (H*2O=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:TAN TO BROWN SLAB W/MILD CHARACTERISTIC ODOR.
Percent Volatiles by Volume:SUPDAT
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS/REDUCING AGENTS WHICH ARE GENRLY NOT COMPAT W/MANY ORG
CMPDS, ARE NOT COMPAT W/THESE ELASTOMERS.
Stability Condition to Avoid:OVERHEATING.
Hazardous Decomposition Products:FUMES PRDCD WHEN HEATED TO DECOMP
TEMPS MAY CONTAIN:OXIDES OF CARBON, HYDROGEN CYANIDE & SM AMTS OF
AROMATIC & (ING 5)
Disposal
Waste Disposal Methods:DISPOSAL MUST BE I/A/W FEDERAL, STATE & LOCAL
REGULATIONS .
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.